Author: LVLJ05

Posted on by

Jeep TJ Gear Packages – Ring & Pinion w/ Master Install Kits | Revolution

Jeep TJ Gear Package | Jeep TJ Rubicon Gear Package

Jeep TJ Gear Packages – Ring & Pinion with Master Install Kits by Revolution Revolution Gear & Axle

Jeep TJ Gear Packages include Revolution Gear & Axles Premium Ring & Pinion along with Master Install Kits for both the front and Rear Axles. Available in many different Gear Ratios. Choose the Jeep TJ Gear Package that fits your Jeep TJ or Unlimited LJ axle configuration.

Jeep TJ Gear Packages available in:

Revolution Gear & Axle Jeep TJ Gear Packages

Revolution Gear & Axle –  Ring & Pinion

Jeep TJ Gear Package
Jeep TJ Gear Package

Revolution Ring & Pinion are made from top quality 8620 Steel and are precision heat treated to OEM specifications, making for the best aftermarket gears available. All Revolution Ring and Pinion sets are backed by an industry leading 2 Year Warranty against defects. Revolution gears are also double, and in some cases triple lapped for flawless setup, smother running and longer life.

 

 

Revolution Gear & Axle – Master Install Kits 

Dana 30 TJ Master Install Kit
D30 TJ Master Install Kit by Revolution Gear & Axle
  • new OEM quality Pinion & Carrier Bearings,
  • Pinion Seal,
  • Pinion Nut,
  • Crush Sleeve (where applies),
  • Ring Gear bolts (most applications)
  • Pinion & Carrier Shims
  • Gear marking compound and Loctite for the ring gear bolts.

 

Revolution Gear & Axle

When you need a quality Jeep TJ Gear Package – look no further than Revolution Gear & Axle. Revolution offers a full line of Premium, Top Quality Ring and Pinion gear sets in all the popular ratios to accommodate most light trucks, Jeeps and rear-wheel drive passenger cars. Revolution ring and pinion sets are constructed to last longer, run quieter and setup easier than other aftermarket gears. We do this by concentrating on every detail in the manufacturing processes of our gears. From design, to final inspection Revolution’s attention to detail and precision guarantees that you’re getting the highest quality gear set available.Often times you need more pulling power out of your tow rig and the factory ratios are not low enough to give you the power you need. Other times you find that when you upgraded your under sized stock tires to something a little bigger and with more style you find that your speedometer is off and the power band seems to have slipped – it’s time to re-gear and reclaim your power. Revolution offers a full line of ratios for your 2 and 4 wheel drive trucks and SUVs. Revolution also offers a large number of ratios for your racing needs as well. Our performance gears are designed to handle higher horsepower and heavy loads. Whether you are correcting for larger tires, racing or just looking for more power, Revolution has the gear for you!

 

Posted on by

Jeep JK LED Headlights and Headlight Bulbs

Jeep JK LED Headlights and Headlight Bulbs are available at 4LowParts.com. We carry Jeep JK LED Headlights and Replacement Bulbs from Lifetime LED Lights. LED Headlights last up to 30,000 hours, which is much more than conventional or HID replacement bulbs. H13 LED Headlight Bulbs for Jeep JK come with Low Beam and High Beam and plug directly into the your Jeep without the need for any additional harnesses. Still want want brighter headlights, then choose the H13 Super Bright LED Headlights. These replacement bulbs produce 3200 LM of light on Low Beam and 3600 LM on High Beam and are brighter than most HID headlight bulbs on the market.There are also complete replacement headlights such as the 7″ Round LED Headlight for Jeep JK . These Jeep JK LED headlights will not only help you see better at night, but help you be seen in the day with the built in daytime running lights. These Headlights and replacement bulbs are also Energy Star and DOT compliant.

Jeep JK LED Headlights and Headlight Bulbs

 

H13 High/Low LED Headlight. These H13 LED Headlight Bulbs produce 2200LM in Low Beam and 2600LM in High Beam and have an integrated fan. These replacement bulbs fit directly into the factory plugs and do not need any additional harnesses.These Headlight Bulbs are DOT compliant and Energy Star Compliant and will last for more than 30,000 hours Save 80% on energy over the halogen bulbs More information on this product available here.

 

 H13 LED HEADLIGHT REPLACEMENT BULBS – 70 WATT SUPER BRIGHT for Jeep JK. These Super bright Jeep JK LED Headlights Replacement Bulbs are brighter Replacement Bulbs than previous models. The CREE LEDs make these super bright H13 LED Headlight Replacement Bulbs brighter than the majority of HID LED Headlight Replacement Bulbs currently on the market. Each of the H13 super bright LED Headlight Replacement Bulbs produce 3600LM on high beam and 3200LM on low beam (each bulb). More information on this product available here.

 

7 Inch Round LED Headlight  assemblies use amazing 40 watts of CREE LED power giving you both hi and low beam functions. These replace your sealed beam H6024 headlight in some Jeeps (TJ, CJ. LJ) or plug directly into your JK with the H13 included plug. Also included are a pair of H13 Canbus error cancelers and H13 to H4 adapters for older vehicles.

LIfetime LED Lights offers a wide variety of Headlights and Headlight Bulbs for Jeep JK!
Lifetime LED Lights provides you with a LIFETIME warranty on the LED’s in light products. No fine print, no question about what a limited lifetime means.

Posted on by

Jeep TJ Dana 30 Gear Set – Ring & Pinion

Dana 30 TJ Ring and Pinion|Jeep TJ Dana 30 Gear Set

Jeep TJ Dana 30 Gear Set- short pinion by Revolution Gear & Axle include Premium Ring & Pinion Gear Sets made from the highest quality 8620 material. They are double lapped for easy setup & years of quiet, cool, trouble free operation.

Revolution Ring and Pinions come with an industry leading FREE 2 year warranty against manufacture defects.

Jeep TJ Dana 30 Gear Set available in the following Gear Ratios : 3.58 | 3.73 | 4.10 | 4.56 | 4.88 | 5.13

Jeep TJ Dana 30 Gear Set – short pinion Install Kits:

Master Install Kit 

Basic Install Kit

Jeep TJ Dana 30 Gear Set

When you need a quality gear set – look no further than Revolution Gear & Axle. Revolution offers a full line of Premium, Top Quality Ring and Pinion gear sets in all the popular ratios to accommodate most light trucks, Jeeps and rear-wheel drive passenger cars. Revolution ring and pinion sets are constructed to last longer, run quieter and setup easier than other aftermarket gears. We do this by concentrating on every detail in the manufacturing processes of our gears. From design, to final inspection Revolution’s attention to detail and precision guarantees that you’re getting the highest quality gear set available.

Often times you need more pulling power out of your tow rig and the factory ratios are not low enough to give you the power you need. Other times you find that when you upgraded your under sized stock tires to something a little bigger and with more style you find that your speedometer is off and the power band seems to have slipped – it’s time to re-gear and reclaim your power. Revolution offers a full line of ratios for your 2 and 4 wheel drive trucks and SUVs. Revolution also offers a large number of ratios for your racing needs as well. Our performance gears are designed to handle higher horsepower and heavy loads. Whether you are correcting for larger tires, racing or just looking for more power, Revolution has the gear for you!

Posted on by

Orange Winch Rope with Safety Thimble – 85ft | 18,500lb

Orange Winch Rope with Black Safety Thimble 2 Package

TRE is offering a bundle package consisting of an “Original” Safety Thimble 2 along with 85′ of  3/8″ synthetic orange winch rope and all the hardware needed for installation including  a new and improved drum attachment. Made in The USA.

Orange Winch Rope

The winch rope is a 3/8″ diameter synthetic orange winch rope with a certified breaking strength of 18,500lbs. Included on the synthetic rope is a newly designed drum attachment that reduces abrasion on the winch line under load.

Safety Thimble

The Original Safety Thimble 2 is a must needed item for safer recovery operations. It is made of 6061 Aluminum specially designed to protect you and your equipment. The Thimble is 100% made in the USA The thimble fits securely against your hawse fairlead and prevents scratches in the fairlead which damages synthetic winch ropes. The Safety Thimble 2 is anodized black with a 2 step Electrolytic process to help resist fading.

Winch Rope with Safety Thimble includes:

  • Safety Thimble 2
  • 85ft of 3/8″ orange synthetic winch rope (18,500lb breaking strength)
  • Drum Attachment and all hardware needed for installation

The synthetic rope, safety thimble, and winch attachment come fully assembled. All you will need to do is install the rope on your winch d

We have synthetic winch rope available in many colors, check out all our different colors in Synthetic Winch Rope

Mfg: TRE (Tactical Recovery Equipment)

 

 

Posted on by

Savvy Ultimate Currie Steering Kit with Heat Treated Tie Rod | Jeep TJ

Savvy Ultimate Currie Steering Kit (ULT-KIT) for Jeep TJ brings a whole new level of performance and strength to the steering on your Jeep. The Tie Rod is so strong, care must be taken not to destroy other suspension components. They are heated treated to allow the rod to bend and spring back. This is a complete steering kit for your Jeep TJ/LJ with tie rod and drag link.

Savvy Ultimate Currie Steering Kit

Savvy Ultimate Currie Steering Kit 4340 heat treated 1.25″ solid Tie Rod and Currie Drag link Complete Steering KIT- Replace your existing steering with the ultimate combination. The Currie Drag link and Savvy 4340 Heat treated Tie rod

Ultimate 4340 heat treated 1.25″ solid Tie-Rod with a Currie drag link with new Tie-Rod Ends

This tie rod brings a whole new level of performance and strength to the steering on your Jeep. These are so strong care must be taken not to destroy other suspension components. These are 4340 solid stock that is drilled and tapped for the ends. They are heated treated to allow the rod to bend and spring back. The ultimate tie-rod!

A heavy duty stabilizer bracket is included with the kit.

Not what your looking for? Check out our other Jeep Steering Parts

Posted on by

CE-9701 Currie Currectlync Heavy Duty Tie Rod/Drag Link – Jeep TJ

CE-9701 Currie Currectlync Heavy Duty Tie Rod/Drag Link system for Jeep TJ, LJ, XJ, MJ and ZJ. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary.

Currie Currectlync Heavy Duty Tie Rod/Drag Link is rated at 200% stronger than the stock components.

CE-9701 Currie Currectlync Heavy Duty Tie Rod/Drag Link Features:

  • a 1 ¼” diameter forged alloy drag link,
  • 1 ¼” solid alloy steel tie rod bar that is bored and threaded on the ends.
  • 7/8″ thread tie rod ends and
  • 1 1/8″ thread drag link ends with boots are included
  • Currie heavy duty steering stabilizer bracket.

 

NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.

 

CurrieTie Rods, Drag Links, Steering Stabilizers, Pitman Arms or other parts can be found in Steering Parts

Posted on by

Fox Shocks for Jeep JK with 4-6″ Lift Package

Fox Shocks for Jeep JK with 4-6 inch Lift Package

Fox Shocks for Jeep JK with 4-6″ Lift Package contains all the Fox shock absorbers (4) needed for your Jeep JK or JKU with a 4-6″ Lift. This package contains (2) Front 2.0 Evolution Series IFP Shocks (983-50-002) and (2) Rear 2.0 Evolution Series IFP Shocks (980-50-004) and includes Free Shipping.

Fits:  07+ Jeep Wrangler JK and JKU with a 4-6″ Lift.

Fox Shocks for Jeep JK with 4-6″ Lift

Fox 2.0 Evolution Series IFP smooth body Fox Shocks for Jeep JK with 4-6″ Lift are “bolt on” and give you increased ride quality and the control you need when heading into the unknown. They use our proven damping technology to provide a comfortable on-road ride and predictable off-road handling in a variety of conditions.

2.0 Evolution Series IFP Shock Specifications:

Body – 2.0″ Smooth bore and honed seamless alloy bodies

Body Plating  – Thick silver powder coat

Internal Reservoir – Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen

Shaft – 5/8″ NitroSteel® alloy steel

Oil – JM92 Advanced Suspension Fluid for improved performance at variable temperatures

Bushings – Quiet nitrile rubber allows for increased suspension articulation

Mounting – Direct replacement for stock and aftermarket lifts kits

Part #: 983-50-002 & 983-50-004

 

Posted on by

Jeep JK Ring & Pinion – Gear Set Packages

Jeep JK Ring & Pinion – Gear Set Packages from 4LowParts has everything your need to re-gear your Jeep JK or Jeep JKU including premium Ring & Pinion and Master Install Kits. All of Our Jeep JK Ring & Pinion Gear sets come from Revolution Gear and Axle and come in many different Gear Ratios to accommodate the gear size you require. W

Jeep JK Ring & Pinion Gear Set Packages

Jeep JK Ring & Pinion Gear Set Packages feature Ring & Pinion for the front and rear with master install kits for both Jeep JK and Jeep JK Rubicon Models. All Gears and Install Kits are provided from Revolution Gear and Axle.

 

Jeep JK Gear Package for non-Rubicon Models such as Sahara, Sport, Willys Edition and X that have a stock Dana 30 front axle and a rear Dana 44 axle. This package includes premium Ring & Pinion for front and Rear Axles along with Master Install Kits and new carriers if needed.

 

Jeep JK Gear Package for Rubicon Models that have a stock Dana 44 Front and Rear axle with stock Rubicon Lockers. This package inc;ludes premium Ring & Pinion for the front and the rear axles along with Master Install Kits.

 

Posted on by

Jeep JK Ring & Pinion – Dana 30

Dana 30 JK Ring & Pinion - Front | Jeep JK

Jeep JK Ring & Pinion

Revolution Gear & Axle’s Premium Dana 30 JK Ring & Pinion Front gear sets are made from the highest quality 8620 material. They are double lapped for easy setup & years of quiet, cool, trouble free operation.

Revolution Gears come with an industry leading FREE 2 year warranty against manufacture defects.

Jeep JK Ring & Pinion Gear Ratios: 4.56, 4.88, 5.13

Fits 07-14 Jeep JK and Jeep JKU

*Does not fit Rubicon Models

Jeep JK Ring & Pinion

When you need a quality Jeep JK Ring & Pinion gear set – look no further than Revolution Gear & Axle. Revolution offers a full line of Premium, Top Quality Ring and Pinion gear sets in all the popular ratios to accommodate most light trucks, Jeeps and rear-wheel drive passenger cars. Revolution ring and pinion sets are constructed to last longer, run quieter and setup easier than other aftermarket gears. We do this by concentrating on every detail in the manufacturing processes of our gears. From design, to final inspection Revolution’s attention to detail and precision guarantees that you’re getting the highest quality gear set available.

Often times you need more pulling power out of your tow rig and the factory ratios are not low enough to give you the power you need. Other times you find that when you upgraded your under sized stock tires to something a little bigger and with more style you find that your speedometer is off and the power band seems to have slipped – it’s time to re-gear and reclaim your power. Revolution offers a full line of ratios for your 2 and 4 wheel drive trucks and SUVs. Revolution also offers a large number of ratios for your racing needs as well. Our performance gears are designed to handle higher horsepower and heavy loads. Whether you are correcting for larger tires, racing or just looking for more power, Revolution has the gear for you!

 

Posted on by

Jeep JK Gear Package – Dana 30/44

JEEP JK GEAR PACKAGE IS A COMPLETE PACKAGE FOR JEEP JK AND JKU NON-RUBICON MODELS (FRONT DANA 30/REAR DANA 44).

All Jeep JK Gear Packages use Revolution Gear & Axle Premium Ring & Pinion and Master Installation Kits.

Jeep JK Gear Package includes:

  •  Front and Rear Ring & Pinions
  •  Master Installation Kits for both Front & Rear axles.

Gear Ratios Available 4.56, 4.88, 5.13

Upgrading your Gear ratio to 4.88 or 5.13 from OEM gear ratios will require the purchase of a new carrier Dana 30 Carrier

All Ring & Pinion have a 2 year warranty against manufacturer defects

Click Here to Purchase your Jeep JK Gear Package

REVOLUTION RING & PINION

When you need a quality Jeep JK Gear Package – look no further than Revolution Gear & Axle. Revolution offers a full line of Premium, Top Quality Ring and Pinion gear sets in all the popular ratios to accommodate most light trucks, Jeeps and rear-wheel drive passenger cars. Revolution ring and pinion sets are constructed to last longer, run quieter and setup easier than other aftermarket gears. We do this by concentrating on every detail in the manufacturing processes of our gears. From design, to final inspection Revolution’s attention to detail and precision guarantees that you’re getting the highest quality gear set available.Often times you need more pulling power out of your tow rig and the factory ratios are not low enough to give you the power you need. Other times you find that when you upgraded your under sized stock tires to something a little bigger and with more style you find that your speedometer is off and the power band seems to have slipped – it’s time to re-gear and reclaim your power. Revolution offers a full line of ratios for your 2 and 4 wheel drive trucks and SUVs. Revolution also offers a large number of ratios for your racing needs as well. Our performance gears are designed to handle higher horsepower and heavy loads. Whether you are correcting for larger tires, racing or just looking for more power, Revolution has the gear for you!

MASTER OVERHAUL KITS

Our Master Overhaul kits come will all the components to overhaul the bearings in the differential as well at the pieces to install a new Ring & Pinion gear set. Master Kits Include new OEM quality Pinion & Carrier Bearings, Pinion Seal, Pinion Nut, Crush Sleeve (where applies), Ring Gear bolts (most applications) Pinion & Carrier Shims as well as Gear marking compound and Loctite for the ring gear bolts.

Posted on by

Currie 4″ Lift Kit for Jeep JK

4" Lift Kit w/Antirock Rear Sway Bars

Currie 4″ lift kit offers several kits to raise your 2 door Jeep JK that will allow clearance for up to 37″ tires. 4LowParts.com carries several options for the 4″ lift that best fits you and your Jeep.

All Currie 4″ Lift Kits include:

  • 4 progressively wound coil springs
  • 8 Johnny Joint adjustable control arms
  • Front urethane bump stops
  • Rear bump stop spacers
  • Rear coil spring retainers
  • Front and Rear approved stainless braided extended brake lines
  • Dropped pitman arm
  • Relocation kit for the tops of the front and rear shocks
  • Front and rear trac bar relocation kit
  • Front heim jointed adjustable sway bar links for stock sway bar

Currie CE-9808S-The Currie 4″ Lift Kit for any model of the 2-door Jeep JK Wrangler is a cost effective alternative to our full kit.

 

Currie 4″ Lift Kit CE-9808S also includes:

  • Rear heim jointed adjustable sway bar extended links

 

Currie 4″ Lift Kits CE-9808AS also includes:

  • Rear Antirock sway bar kit with steel arms

 

Currie 4″ Lift Kit CE-9808A also includes:

  • Rear Antirock sway bar with aluminum arms

The Currie 4″ Lift Kit Off Road Suspension System for the 2-door Jeep Wrangler Jconsists of only the highest end components in the areas of strength, fit, finish, function, and the R&D testing to back them. CE-9808JCE includes all of the standard

 

Currie 4″ Lift Kit CE-9808JCE also includes: 

  • Front Johnny Joint adjustable length trac bars
  • Front Antirock sway bar with aluminum arms & aluminum frame brackets
  • Rear Antirock sway bar with aluminum arms

Check out 4LowParts.com to see other Lift Kits available

Posted on by

Raceline RT233 AL Monster Beadlock Wheels

Looking to upgrade your Jeep’s wheels? 4LowParts has the best on the market –  Raceline RT233 AL Monster Beadlock Wheels 

Raceline RT233 AL Monster Beadlock Wheels are made from heavy duty cast one piece polished aluminum. These Raceline beadlock wheels are available in 17×9.5 and feature a 32 bolt beadlock system. Available in many different bolt patterns and backspacing including Jeep JK and Jeep TJ bolt patterns. Beadlock wheels secure the bead of a tire to the wheel of the vehicle to make your ride that much better.

Raceline RT233 AL Features:

  • Wheel Diameter: 17″
  • Wheel Width: 9.5″
  • Beadlock: 32 bolt beadlock system
  • Polished Heavy Duty Cast Aluminum
  • Aluminum Ring included

Bolt Patterns Available Include:

  • 5X4.5-Jeep TJ
  • 5X5-Jeep JK
  • 5X5.5
  • 5X6.5
  • 6X5.5
  • 8X6.5

Wheel Back Space Available Include:

  • 4.00″
  • 4.50″
  • 4.71″

Free Shipping

Visit 4LowParts.com to check out more Raceline Wheel inventory and other Jeep Parts to optimize your ride for the next off roading adventure!

Posted on by

Jeep JK Gear Package – Ring & Pinion with Install Kits

Jeep JK Gear Package is a Complete Gear Package including Front and Rear Ring & Pinion and Master Install Kits by Revolution Gear & Axle.

4LowParts has created a Jeep JK Gear Package to help make your RIng & Pinion purchases a little easier and cheaper by offering complete gear packages. These packages include Front and Rear Ring & Pinion gear sets along with Master Install Kits and are available for both the Jeep JK with stock Dana 30 front axle and stock Dana 44 rear axle, and also the Jeep JK Rubicon with front and rear Dana 44 axles with stock lockers. These packages are available in all the necessary gear ratios from Revolution Gear & Axle.

The Jeep JK Gear Package uses Revolution Gear & Axle Premium Gears and Installation Kits

Jeep JK Gear Package for Rubicon Models Only  includes:

  •  Front Gears (4.10, 4.56, 4.88, 5.13 or 5.38)
  •  Rear Gears (4.10, 4.56, 4.88, 5.13 or 5.38)
  •  Master Installation Kits for both Front & Rear axles.

Jeep JK Gear Package for non-Rubicon Models

  •  Front Gears (4.56, 4.88, 5.13 or 5.38)
  •  Rear Gears
  •  Master Installation Kits for both Front & Rear axles.
  • Kits will also include standard open cases in some cases, please read options carefully to insure you get all the parts you need

All Ring & Pinion have a 2 year warranty against manufacturer defects

Visit 4LowParts.com and check out other upgrades are available for your Jeep before your next adventure!

Revolution Gear & Axle 

Ring & Pinion Gear Sets

When you need a quality – look no further than Revolution Gear & Axle’s Jeep JK Gear Package. Revolution offers a full line of Premium, Top Quality Ring and Pinion gear sets in all the popular ratios to accommodate most light trucks, Jeeps and rear-wheel drive passenger cars. Revolution ring and pinion sets are constructed to last longer, run quieter and setup easier than other aftermarket gears. We do this by concentrating on every detail in the manufacturing processes of our gears. From design, to final inspection Revolution’s attention to detail and precision guarantees that you’re getting the highest quality gear set available.Often times you need more pulling power out of your tow rig and the factory ratios are not low enough to give you the power you need. Other times you find that when you upgraded your under sized stock tires to something a little bigger and with more style you find that your speedometer is off and the power band seems to have slipped – it’s time to re-gear and reclaim your power. Revolution offers a full line of ratios for your 2 and 4 wheel drive trucks and SUVs. Revolution also offers a large number of ratios for your racing needs as well. Our performance gears are designed to handle higher horsepower and heavy loads. Whether you are correcting for larger tires, racing or just looking for more power, Revolution has the gear for you!

Master Install Kits

Revolution Gear & Axle Master Overhaul kits come will all the components to overhaul the bearings in the differential as well at the pieces to install a new Ring & Pinion gear set. Master Kits Include new OEM quality Pinion & Carrier Bearings, Pinion Seal, Pinion Nut, Crush Sleeve (where applies), Ring Gear bolts (most applications) Pinion & Carrier Shims as well as Gear marking compound and Loctite for the ring gear bolts.

Posted on by

The Best Winch for Jeep JK | WARN ZEON Winches

You or your buddy are stuck in a tough spot off the trail and the only way to pull your rig out is with a winch. Use the best winch for Jeep JK and go with WARN ZEON Winches and WARN ZEON Platinum Winches featured at 4LowParts.com.

WARN ZEON Series Winches has the highest of durability and dependability that’s been redesigned and re-engineered.  WARN Winches carry the advanced technology of ZEON Platinum Series that features off-road rugged construction, and extreme sealing with high performance ratings. The Platinum series features the Advanced Wireless Remote that controls not only the winch, but also the clutch and other accessories.

WARN ZEON Winch Series includes:

WARN ZEON 12–  Features increased performance and durability, steel rope, and a hefty 12,000 lb. single-line pulling capacity. With a modern rugged design, upgraded internal components, and increased performance and durability, ZEON is a new name from the most trusted name in winches.

WARN ZEON 10– Durability and waterproofing sets a new benchmark for its class especially with a high-performance motor package with 10,000lbs pulling capacity.

WARN ZEON 10-S– With 10,000lbs pulling capacity and a hyper-durable cast-aluminum housing, satin-black finish you’ve got a workhorse unit you can trust for years to come. This winch comes with Spyddura Synthetic Rope that is light weight and more flexible then cable.

WARN ZEON 8– WARN ZEON 8 is the perfect addition to your Jeep JK, TJ or YJ with a modern rugged design, upgraded internal components, and increased performance and durability. The 8,000 lb. pulling capacity, combined with a fast line speed make this winch unstoppable.

WARN ZEON 8-S–  Heat-dissipating brake down and with an incredibly smooth planetary gear train, this winch is ready to hit the trail. The WARN ZEON 8-S has a 8,000 lb. pulling capacity and comes with a Spydura Synthetic Rope that is light weight and more flexible than cable.

WARN ZEON Platinum Winch Series includes:

WARN ZEON 12 Platinum– The toughest, most technologically-advanced winch on the trail today with 12,000lbs of single line pulling capacity. This Winch features the Advanced Wireless Remote-the new command central control with remote clutch, vehicle battery feedback, and even auxiliary controls for lights and more.

WARN ZEON 10 Platinum– Advanced technology that includes a steel rope and 10,000lbs of pulling capacity. An Advanced Wireless Remote controls not only the winch, but also the clutch and other accessories.

WARN ZEON 10-S Platinum– This winch is a game changer for ATV, Trucks and Jeeps. 20% faster line speed, and extreme IP68-rated waterproofing with 10,000lbs pulling capacity.

 

4LowParts.com has all the Winches & Accessories you need to upgrade and optimize your Jeep.

 

 

 

 

 

 

 

Posted on by

CE-9900 – Currie ANTIROCK Front Sway Bar Kit for Jeep TJ

CE-9900 Currie ANTIROCK Front Sway Bar

The CE-9900 Currie Antirock front sway bar kit for Jeep TJ and LJ provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

This CE-9900 kit includes all components for installation including, bushings, hardware, and step-by-step instructions. It is positioned through the front cross member and attaches to the stock mounts on the axle housing on Jeep TJ’s and LJ’s. The Currie Antirock sway bar does not need to be disconnected for off-road use.

CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup.

Fits Jeep TJ and TJ Unlimited (LJ)

Part #: CE-9900

Mfr: Currie Enterprises

Get your CE-9900 Currie Antirock Front Sway Bar Kit Here

Posted on by

CE-9701 CURRECTLYNC Heavy Duty Tie Rod System for Jeep TJ

CE-9701 | Currie CURRECTLYNC Heavy Duty Tie Rod System

CE-9701 CURRECTLYNC Heavy Duty Tie Rod System for Jeep TJ

The Currie Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, and MJ vehicles features, a 1 ¼” diameter forged alloy drag link, and 1 ¼” solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer bracket.

This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary.

This unit is rated at 200% stronger than the stock component.

Fits:

  • Jeep Wrangler TJ
  • Jeep Wrangler LJ
  • Jeep Cherokee XJ
  • Jeep Cherokee MJ

 

Part # CE-9701

Mfg: Currie Enterprises

Posted on by

Currie Antirock Sway Bar Kits for Jeep Wrangler JK

Currie Antirock Sway Bar Kits

Need a Currie Antirock Sway Bar Kit for your Jeep JK or JKU?

Currie Antirock Sway Bar Kits for Jeep Wrangler JK are a popular choice among Jeep JK and JKU owners. The Currie Antirock replaces your factory sway bar.The Antirock kits allow you the suspension travel needed when going off road and the stability when driving on the street all without having to disconnect and connect your stock sway bar. The Currie Antirock  sway bar kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road swaybar is designed to directly replace the stock Jeep Wrangler JK and JKU sway bar.Currie Antirock Sway Bar Kits are available for both the front and rear on your Jeep JK. For maximum performance of the Currie Antirock Sway Bar Kits, while not required, it is recommended that you replace both front and rear sway bars. Antirock Kits are available in many different configurations depending on your personal preference, but performance is the same from each kit. 4LowParts.com is an authorized Currie Enterprises Dealer and carries all of the Currie Antirock Sway Bar Kits in stock. Here is some information on each of the Front Currie Antirock Sway Bar Kits available for your Jeep JK or JKU.

Currie  Front Antirock Sway Bar Kit with Steel Brackets CE-9900JKF

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

CE-9900JKF kit includes all components for installation including:

  • the sway bar,
  • semi-gloss black powder coated bolt-on steel frame brackets,
  • delron bushings,
  • semi-gloss black powder coated arms,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • and step-by-step instructions.
  • Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicle’s axle housing.

Currie Front Antirock Sway Bar Kit with Billet Aluminum Frame Brackets CE-9900JKFA 

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

CE-9900JKFA kit includes all components for installation including:

  • the sway bar,
  • bolt-on billet aluminum frame brackets which feature the “RJ”  logo milled into the sides of them and semi-gloss black powder coat finish,
  • delron bushings,
  • semi-gloss black powder coated arms,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • step-by-step instructions.

Currie Front Antirock Sway Bar Kit with Steel Brackets and Aluminum Arms CE-9900JKFSA

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

CE-9900JKFSA kit includes all components for installation including:

  • sway bar,
  • semi-gloss black powder coated bolt-on steel frame brackets,
  • delron bushings,
  • billet aluminum arms that are bent to spec.,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • step-by-step instructions.

Currie Front Antirock Sway Bar Kit w/ Aluminum Frame Brackets and Arms CE-9900JKFAA

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

CE-9900JKFAA kit includes all components for installation including:

  • sway bar,
  • bolt-on billet aluminum frame brackets which feature the RockJock logo milled into the sides of them and semi-gloss black powder coat finish,
  • delron bushings,
  • billet aluminum arms that are bent to spec.,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • step-by-step instructions.

 

 

Posted on by

Jeep TJ Rear Axle Shaft Upgrade Kits for Dana 44

Jeep TJ Rear Axle Shaft

Jeep TJ Rear Axle Shaft by Revolution Gear & Axle has introduced 4340 Chromoly Rear Axle Kits for the Dana 44. The axle kits are the made of 4340 Chromoly and manufactured in the USA! The Axle Shaft Upgrade kits offer superior strength to OEM or other 4130 Axle Shafts. The Axle Kits come complete with everything needed to replace both rear axle shafts. This kit is designed for a Dana 44 found on Jeep TJ, TJ Unlimited (LJ), Jeep XJ and Jeep YJ and are 30 spline.

4LowParts.com is an Authorized Dealer of Revolution Gear & Axle

Here is a good write up about these axle shafts on Jeepforum.com along with more pictures

Revolution Gear & Axle

Revolution Gear & Axle offers a large and ever growing portfolio of rear axles for many common applications, chances are we have an axle that will fit your application.

In addition to replacement rear axles, Revolution also stocks a wide verity of 100% US Made Chrome-Moly rear axles. Revolution US Made axles come with a Lifetime Warranty that even covers bent shafts!

 

Posted on by

30″ LED Light Bar Dual Row by BullDog LED Lighting

30" LED light bar

30″ LED Light Bar Dual Row by Bulldog LED Lighting

The 30 inch LED Dual Row Light Bar set from Bulldog LED Lighting is MADE IN USA.  This affordable LED Light bar set is high in quality and will turn darkness into daylight.

BullDog LED Lighting was designed by an Off road desert racer and the quality of the design is perfect for your Jeep JK, TJ, YJ, Truck, ATV or other off road vehicle.

30″ LED Light Bar sets are available in:

  • Combo,
  • Flood
  • Spot

Mounting Options:

  • Bottom Channel Mount
  • Side Bolt Mount.

Click Here to Purchase a 30″ LED Light Bar by BullDog LED Lighting

 

ALL LIGHTS COME WITH STANDARD BOTTOM MOUNTING SYSTEM AND WIRING HARNESS

30″ LED Light Bar Product Specifications: 

  • Outside dimensions: 21 1/16 x 3 1/8 x 3 1/8
  • Voltage Input: 9~36v
  • Operating Temperature: -49 to 185°F
  • LEDs: 3w LEDs – Drawing 120 Watts
  • LED Life: 50,000hrs Lumens: 9600lm
  • Style: 2 x Horizontal Rows
  • Beam Patterns: Flood, Spot, or Combo Beam
  • Housing Color: Black(powder coat)
  • Housing Type: Aluminum
  • Waterproof:IP68
Posted on by

JK-9703 | Jeep JK Heavy Duty Steering System

Currie Currectlync Drag Link JK-9703DL

The JK-9703 Jeep JK Heavy Duty Steering System by Currie Enterprises with a tie rod and drag link system feature:

  • 1 5/8″ diameter 4130 chrome moly heat treated steel tubing tie rod and drag link tubes
  • 1 1/4″ thread forged steel greasable tie rod ends,
  • as well as new steering stabilizer shock bracket and u-bolt kit.

The JK-9703 massive tie rod ends thread into the tie rod end body so that they may:

  • 1) be replaced without replacing the whole rod end saving cost,
  • 2) the same threaded in tie rod end is used at all 4 points so only one spare would have to be carried, and
  • 3) they may be unscrewed from the rod end bodies and screwed in from the other side if a flipped tie rod and/or drag link was desired.

Tie rod and drag link tubes feature wrench flats machined onto them and jam nuts for ease of adjustment. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary, and best of all, it’s made in the U.S.A.!

NOTE 1: Flipping the tie rod or drag link would require retapering the tie rod end holes from the top side of the knuckle.

NOTE 2: Replaces part number JK-9701.

Part #: JK-9703